DINKONDA GLOBAL Power Plants Special AHR Series Wear-resistant And Corrosion-resistant Natural Rubber Slurry Pump, Cantilever Horizontal Double Shell Axial Suction Centrifugal Pump

DINKONDA GLOBAL Power Plants Special AHR Series Wear-resistant And Corrosion-resistant Natural Rubber Slurry Pump, Cantilever Horizontal Double Shell Axial Suction Centrifugal Pump

Product Overview

The AHR type rubber lined slurry pump belongs to the cantilever horizontal double shell axial suction centrifugal slurry pump, which is specially developed for corrosive fine particle slurry working conditions. The pump outlet can be adjusted at 45 ° intervals, supporting 8 different installation angles, and can flexibly adapt to the on-site pipeline layout. The internal configuration of the pump is equipped with replaceable rubber lining, and all flow components such as impeller, sheath, and protective plate are made of wear-resistant and corrosion-resistant natural rubber, which is very suitable for conveying high concentration slurry without sharp corners and small particles, as well as various corrosive solid-liquid mixed media. It is widely used in industries such as mineral processing, wet metallurgy, chemical engineering, and environmental protection.

Structural Composition

1. * * Double shell pump body and rubber lining**
Adopting an inner and outer double-layer shell structure, the outer metal pump body bears the pressure load, and the inner layer assembly can replace the overall rubber lining. The inner lining can be disassembled and replaced separately after wear, and the outer pump casing can be reused for a long time, effectively reducing long-term operating costs.

2. Rubber overcurrent components**
The impeller, front and rear sheaths, and guard plate are all made of natural rubber material, which has excellent elasticity and strong resistance to erosion of smooth and non sharp particles. At the same time, it is resistant to acid and alkali corrosion, protecting the pump body from medium erosion.

3. * * Cantilever bracket assembly**
Heavy duty bracket assembly, cantilever shaft structure design, stable load-bearing capacity, reliable bearing lubrication, good overall rigidity, and the ability to operate continuously for a long time.

4. * * Shaft sealing system**
Multiple types of sealing structures can be selected to adapt to different working conditions, suppress the leakage of slurry medium to the outside, and ensure a clean pump room environment and safe operation of equipment.

5. * * Transmission components**
Multiple transmission schemes can be matched, including direct or belt transmission, and the drive layout can be flexibly selected according to the site space and speed requirements.

Core Features

1. * * Multi angle adjustable export**
The pump outlet rotates at 45 ° intervals, with a total of 8 installation positions, not limited by the direction of the pipeline, making it convenient for on-site pipeline layout and reducing the amount of pipeline bends and renovation work.

2. Rubber lining with anti-corrosion and wear-resistant properties**
The entire set of overcurrent components is made of natural rubber, which provides elastic cushioning for particle impact and is suitable for fine particle media without sharp corners; Resistant to weak acid and weak alkali corrosion, capable of transporting corrosive slurries.

3. * * Double shell replaceable lining structure**
The outer shell is under pressure, while the rubber lining is subject to wear and corrosion. Only rubber vulnerable parts are replaced, and the shell can be reused, resulting in better economic efficiency throughout the entire life cycle of the equipment.

4. * * Multiple sealing options to choose from**
Configurable packing seal, secondary impeller seal, packing+secondary impeller combination seal, mechanical seal, catering to different working conditions such as low pressure, high pressure, and continuous operation.

5. * * Rich transmission modes**
DC direct drive, CR parallel belt drive, ZVZ upper and lower belt drive, CV vertical belt drive, meet the project requirements of different installation spaces and speed regulation.

6. Strong adaptability to media**
Specially designed for small particle sizes and solid particles without sharp edges, it can transport high concentration slurries and adapt to various corrosive slurries, with better adaptability to brittle particle media than metal slurry pumps.

Technical Parameters

-Product model: AHR type lined slurry pump
-Structural form: Cantilever, horizontal double shell axial suction centrifugal slurry pump
-Export installation: 45 ° interval, 8 adjustable angles
-Material of overcurrent components: wear-resistant and corrosion-resistant natural rubber (lining, impeller, sheath, protective plate)
-Applicable media: high concentration slurry with small particle size and no sharp particles, corrosive solid-liquid slurry
-Shaft seal form: packing seal/secondary impeller seal/packing+secondary impeller seal/mechanical seal
-Transmission type: DC direct drive, CR parallel belt drive, ZVZ upper and lower belt drive, CV vertical belt drive

FAQ:
Q1.What about the lead time?
A: 5-7 days for Sample preparing ,15-20 working days for mass production.

Q2. Is it OK to print my logo on led light product?
A: Yes. Please inform us formally before our production.

Q3: Do you offer guarantee for the products?
A: Yes, we offer 1 years warranty to our products.

Q4: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.

Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.

Company Profile

DINKONDA GLOBAL has been developing and supplying equipment and components for specialized thermal power plants and related industries for 20 years and is one of the a market-leading global manufacturers and providers in the industry. We have a professional technical research and development team, professional management talents and dozens of quality inspection personnel. The company has more than 50 CNC machining centers, CNC lathes, various inspection equipment and other professional equipments.
Our comprehensive product portfolio and over 20 years of industry knowledge mean customers can rely on us to deliver innovative, reliable and economic products. Chenglei products are designed and manufactured with quality components and clear user interfaces for quick and safe operation in the field. Our strict product development and testing ensures long-lasting performance and continued reliability. Our independently developed and produced CL series valve electric actuators are widely used in various industries such as Oil & Gas, Water & Power, and Chemical, Process & Industrial .
Customers rely on us for innovative, high quality and dependable products for managing the flow of liquids, gases and powders. We help customers around the world to reduce emissions, improve efficiency, minimize their environmental impact and assure safety.