DINKONDA GLOBAL Power Plants Special SUS304/316L 2205 Duplex Steel TA1 Titanium SWEP GX-140 Plate Heat Exchanger Domestic Substitute Heat Exchanger Plate

DINKONDA GLOBAL Power Plants Special SUS304/316L 2205 Duplex Steel TA1 Titanium SWEP GX-140 Plate Heat Exchanger Domestic Substitute Heat Exchanger Plate

Product Overview

The GX-140 plate heat exchanger plate produced by DINKONDA GLOBAL is a domestically produced substitute plate for the SWEP GX-140 model, which can be directly matched and exchanged with the original SWEP GX-140 plate heat exchanger without the need to modify the equipment frame, clamping bolts, or sealing points. The plate adopts precision molding technology and replicates the original factory's herringbone corrugated heat exchange structure. On the basis of ensuring heat exchange performance equivalent to imported components, it significantly shortens the supply cycle and reduces the cost of spare parts procurement. It is the preferred domestically produced accessory for maintenance and expansion of plate heat exchangers in the heating, chemical, HVAC, and food industries.

Structural Composition

1. * * Heat exchange main plate * *: It is integrally stamped and formed, using a herringbone composite corrugated structure. The dense corrugated patterns on the surface of the plate can force the fluid to form turbulence and improve the heat transfer coefficient; Set up medium through holes at the four corners to achieve staggered distribution of cold and hot media between the plates.

2. * * Sealing gasket slot * *: The edge of the board is pressed together to form a sealing groove, which is used to embed rubber sealing gaskets, isolate hot and cold media, and eliminate the risk of serial flow and leakage. The slot size is completely standardized with the original factory and suitable for original or domestic matching sealing gaskets.

3. * * Positioning Buckle * *: The upper and lower ends of the plate are equipped with hanging positioning clips, which can be smoothly hung between the fixed pressure plate and the movable pressure plate of the heat exchanger, ensuring that multiple plates are aligned and the flow channel is uniform after stacking.

Product Features

1. * * 1:1 factory size replica, directly interchangeable**
The appearance, hole position, ripple parameters, and hanging positioning dimensions of the board are completely standardized with SWEP GX-140. When replacing old equipment with spare parts, they can be directly replaced without changing the heat exchanger frame or pipeline interface. It is easy to disassemble and assemble on site and has a short downtime for maintenance.

2. * * Efficient herringbone ripple, stable heat transfer performance**
Adopting a herringbone reinforced corrugated design, turbulence is continuously generated when the fluid flows through the corrugated channel, significantly reducing the boundary layer thermal resistance and achieving high heat transfer efficiency; Under the condition of small temperature difference between cold and hot media, it still maintains excellent heat transfer capacity, and its performance indicators reach the level of imported plates.

3. * * Multiple materials to choose from, suitable for complex working conditions**
Materials such as 304, 316L stainless steel, 2205 duplex steel, titanium, etc. can be selected according to the working conditions. 304/316L is suitable for conventional water water heat exchange and HVAC heating; 2205 duplex steel and titanium materials can be used in chemical and seawater heat exchange scenarios with high chloride ions and slight corrosion.

4. High stamping accuracy and strong resistance to deformation**
Adopting large high-precision hydraulic molds for integrated stamping, the thickness of the plates is uniform, and the flatness of the plate surface is high; Under the clamping force of the equipment, plastic deformation is less likely to occur, and long-term operation is less likely to cause medium short circuits.

5. * * Domestic supply with obvious cost-effectiveness advantages**
As a domestic substitute spare part, compared with the original imported sheet metal, the procurement cost is lower, the domestic spot stock is sufficient, the delivery cycle is short, solving the pain point of long procurement cycle and high price of imported parts, and reducing the maintenance cost of the equipment throughout its life cycle.

6. * * Strong compatibility, compatible with universal rubber pads**
The sealing groove structure is consistent with the original factory, and can be matched with domestically produced sealing gaskets from Pegasus, as well as compatible with the original SWEP GX-140 gasket. Users can choose spare parts flexibly.

Technical Parameters

-Product model: GX-140 (SWEP domestic substitute board)
-Ripple form: herringbone ripple
-Applicable equipment: SWEP Shuripu GX-140 plate heat exchanger
-Optional materials: 304, 316L, 2205 duplex steel, TA1 titanium material
-Function: Heat transfer between cold and hot media, core heat exchange element of plate heat exchanger
-Matching: Can be matched with corresponding models of sealing gaskets

FAQ:
Q1.What about the lead time?
A: 5-7 days for Sample preparing ,15-20 working days for mass production.

Q2. Is it OK to print my logo on led light product?
A: Yes. Please inform us formally before our production.

Q3: Do you offer guarantee for the products?
A: Yes, we offer 1 years warranty to our products.

Q4: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.

Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.

Company Profile

DINKONDA GLOBAL has been developing and supplying equipment and components for specialized thermal power plants and related industries for 20 years and is one of the a market-leading global manufacturers and providers in the industry. We have a professional technical research and development team, professional management talents and dozens of quality inspection personnel. The company has more than 50 CNC machining centers, CNC lathes, various inspection equipment and other professional equipments.
Our comprehensive product portfolio and over 20 years of industry knowledge mean customers can rely on us to deliver innovative, reliable and economic products. Chenglei products are designed and manufactured with quality components and clear user interfaces for quick and safe operation in the field. Our strict product development and testing ensures long-lasting performance and continued reliability. Our independently developed and produced CL series valve electric actuators are widely used in various industries such as Oil & Gas, Water & Power, and Chemical, Process & Industrial .
Customers rely on us for innovative, high quality and dependable products for managing the flow of liquids, gases and powders. We help customers around the world to reduce emissions, improve efficiency, minimize their environmental impact and assure safety.