Centrifugal Cast Iron Power Plant Pumps 3 Phase 10 Hp For Clean Water OEM
Product Details
Cast Iron Power Plant Pumps
,10 hp Power Plant Pumps
,OEM 10 hp centrifugal pump
DINKONDA GLOBAL Power Plants Special ZX Series Cast Iron Horizontal Three-phase Asynchronous Motor Split Self-priming Pump For Clean Water Centrifugal Pump
Product Overview
The ZX type self-priming centrifugal pump is produced by DINKONDA GLOBAL and belongs to the horizontal split type self-priming pump. The pump body is made of cast iron material, matched with an asynchronous motor, with a coupling guard, and installed as a whole on a common base. The pump has self-priming ability, and only requires initial pumping before starting up. Subsequently, there is no need for manual pumping, and the medium below the installation position of the pump can be suctioned. It is widely used in water supply and drainage, municipal engineering, factory circulation, agricultural water supply and drainage, and other clean water transportation conditions.
Structural Composition
1. Drive motor
Horizontal three-phase asynchronous motor, with a lifting ring on the base and a junction box placed above the motor. Explosion proof and variable frequency motors can be optionally selected and fixed on a common base.
2. Couplings and protective covers
Elastic coupling, equipped with a yellow safety cover on the outside to protect personnel safety, buffer transmission impact, and compensate for coaxiality deviation.
3. Self priming pump body assembly
Cast iron pump casing with built-in water storage chamber structure; The upper part is the outlet flange, and the side is the inlet flange, which can achieve self-priming function without the need for a bottom valve. Internally, it includes an impeller and a gas water separation chamber, which completes the mixing and separation of gas and water and achieves self-priming.
4. Shaft seal components
Mechanical seals or packing seals can be used to prevent medium leakage and adapt to clean water conditions.
5. Pump shaft
High quality carbon steel shaft with high torsional strength ensures transmission stability.
6. Integrated common base
Cast iron integral base, pump head and motor pre installed and aligned at the factory, with reserved anchor bolt holes, directly fixed and installed on site.
Product Features
1. Equipped with self-priming function
The first time the pump chamber is filled with water, there is no need to fill it with water during subsequent start-up. The medium with a liquid level lower than the pump body can be suctioned, simplifying the pipeline and eliminating the need for a bottom valve.
2. Cast iron pump body, sturdy and durable
The overall cast iron shell is impact resistant and suitable for long-term continuous operation outdoors and pump room sites.
3. Gas water separation structure
The pump is equipped with an air-water separation chamber, which automatically discharges air from the pipeline, completes water absorption, and has stable self-priming performance.
4. Easy maintenance and repair
Horizontal structure, by disassembling the coupling, the impeller and seals can be inspected without dismantling the inlet and outlet pipelines.
5. Complete set supply of the whole machine
The pump, motor, base, and protective cover are complete and easy to install on site.
Technical Parameters


FAQ:
Q1.What about the lead time?
A: 5-7 days for Sample preparing ,15-20 working days for mass production.
Q2. Is it OK to print my logo on led light product?
A: Yes. Please inform us formally before our production.
Q3: Do you offer guarantee for the products?
A: Yes, we offer 1 years warranty to our products.
Q4: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.
Company Profile
DINKONDA GLOBAL has been developing and supplying equipment and components for specialized thermal power plants and related industries for 20 years and is one of the a market-leading global manufacturers and providers in the industry. We have a professional technical research and development team, professional management talents and dozens of quality inspection personnel. The company has more than 50 CNC machining centers, CNC lathes, various inspection equipment and other professional equipments.
Our comprehensive product portfolio and over 20 years of industry knowledge mean customers can rely on us to deliver innovative, reliable and economic products. Chenglei products are designed and manufactured with quality components and clear user interfaces for quick and safe operation in the field. Our strict product development and testing ensures long-lasting performance and continued reliability. Our independently developed and produced CL series valve electric actuators are widely used in various industries such as Oil & Gas, Water & Power, and Chemical, Process & Industrial .
Customers rely on us for innovative, high quality and dependable products for managing the flow of liquids, gases and powders. We help customers around the world to reduce emissions, improve efficiency, minimize their environmental impact and assure safety.




Inquiry?
Have A Question? Fill Out The Form Below And We Will Get Back To You As Soon As Possible.