Power Plants Heat Transfer PHE Plate Replacement 0.6mm‑1.0mm Thermowave TL Series

DINKONDA GLOBAL Power Plants Special 0.6‑1.0mm Thickness Thermowave TL Series Plate Heat Exchanger Plate 1:1 Direct Localization Replacement

Product Overview
This thermophave TL series plate is a domestically produced replacement spare part for the German thermophave TL series plate heat exchanger. The complete replica of the original factory plate includes the overall shape, ripple angle, channel depth, four corner flow holes, sealing grooves, and hanging positioning structure. It can directly replace the original imported plate without the need to modify the heat exchanger frame or clamping bolts. The original factory sealing gasket can be directly matched and reused. Effectively addressing the industry pain points of long supply cycles and high procurement costs for imported spare parts, it is commonly used in heat exchange conditions such as HVAC heating, chemical processes, power auxiliary equipment, and food processing.

Structural Composition
1. Plate body: High precision stamped metal sheet, with a herringbone heat transfer corrugated area as the main body. The corrugated parameters are consistent with the original plate of Thermowave TL, ensuring that the heat transfer coefficient and medium pressure drop performance are equivalent to the original parts.

2. Four corner medium flow holes: There are four sets of fluid flow holes on top and bottom, with hole diameter, hole spacing, and flow guide ripple completely aligned with the original factory. The distribution of cold and hot media is uniform, reducing flow dead zones.

3. Sealing groove: The outer periphery of the plate is stamped and formed into a sealing groove, which is compatible with the original rubber sealing gasket of Thermowave TL series.

4. Positioning buckle: The upper and lower positioning buckles of the plate accurately match the heat exchanger guide rod, and the stacking and assembly of the plate are reliably aligned.

5. Import and export diversion zone: The surrounding diversion ripple structure of the hole optimizes fluid distribution and reduces the risk of medium scaling and sedimentation.

Product Features
1. 1: 1. Direct localization replacement: The external contour, ripple parameters, hole size, hanging buckle, and sealing groove are all benchmarked against the original plate of Thermowave TL, and old equipment spare parts can be replaced directly on the machine without any changes to the entire machine.

2. The heat transfer performance is comparable to imported parts: replicating the original factory's herringbone corrugated structure, enhancing fluid turbulence disturbance, and maintaining the same level of heat transfer efficiency and pressure loss as the imported plate.

3. Multiple materials to choose from, suitable for complex corrosion conditions
304 stainless steel: central air conditioning, central heating, ordinary circulating cooling water;
316L stainless steel: process water, mild corrosive medium;
TA1 titanium plate, 254SMO, Hastelloy alloy: seawater, salt solution, strong corrosive chemical media.

4. Multiple thickness options available: 0.6mm, 0.7mm, 0.8mm, 1.0mm; Conventional heat exchange uses 0.6-0.7mm, while medium erosion and wear conditions use thickened plates to improve equipment service life.

5. Reduce operation and maintenance costs: Domestic production has a short supply cycle, and individual damaged pieces can be replaced separately without the need for a complete replacement of the board bundle, greatly reducing equipment maintenance costs.

6. Strong compatibility with operating conditions: It fully matches the original equipment design pressure and temperature levels, and can use the entire set of equipment operating process parameters.

Technical Parameters

FAQ:
Q1.What about the lead time?
A: 5-7 days for Sample preparing ,15-20 working days for mass production.

Q2. Is it OK to print my logo on led light product?
A: Yes. Please inform us formally before our production.

Q3: Do you offer guarantee for the products?
A: Yes, we offer 1 years warranty to our products.

Q4: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.

Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.

Company Profile

DINKONDA GLOBAL has been developing and supplying equipment and components for specialized thermal power plants and related industries for 20 years and is one of the a market-leading global manufacturers and providers in the industry. We have a professional technical research and development team, professional management talents and dozens of quality inspection personnel. The company has more than 50 CNC machining centers, CNC lathes, various inspection equipment and other professional equipments.
Our comprehensive product portfolio and over 20 years of industry knowledge mean customers can rely on us to deliver innovative, reliable and economic products. Chenglei products are designed and manufactured with quality components and clear user interfaces for quick and safe operation in the field. Our strict product development and testing ensures long-lasting performance and continued reliability. Our independently developed and produced CL series valve electric actuators are widely used in various industries such as Oil & Gas, Water & Power, and Chemical, Process & Industrial .
Customers rely on us for innovative, high quality and dependable products for managing the flow of liquids, gases and powders. We help customers around the world to reduce emissions, improve efficiency, minimize their environmental impact and assure safety.