DINKONDA GLOBAL Power Plants Special Auxiliary Cooling, Lubricating Oil Heat Exchange, FUNKE FP Series Detachable Plate Heat Exchanger With Embedded NBR/EPDM/FKM Sealing Gasket

DINKONDA GLOBAL Power Plants Special Auxiliary Cooling, Lubricating Oil Heat Exchange, FUNKE FP Series Detachable Plate Heat Exchanger With Embedded NBR/EPDM/FKM Sealing Gasket

Product Overview
This sealing gasket is a specialized sealing gasket for plate heat exchangers, processed and formed using rubber vulcanization molding technology. The gasket is strictly manufactured according to the original factory drawing dimensions, with the outer contour, corner hole diameter, sealing groove section, end reinforcement ribs, and side positioning buckles all consistent with the original components. It is assembled inside the groove of the heat exchange plate to achieve sealing isolation between the plates, prevent leakage of cold and hot media and internal flow short circuits of the media, and ensure stable heat transfer efficiency of the plate heat exchanger. It is widely used in heat exchange conditions such as HVAC heating, industrial cooling, power, chemical, and mechanical oil cooling.

Structural Composition
1. Main sealing frame: The main sealing ring of the rubber gasket is embedded in the sealing groove of the heat exchange plate to form the main sealing surface, preventing the medium from leaking outward.

2. Medium corner hole sealing ring: Two sets of flow corner hole sealing structures isolate the medium at the corner hole position, avoid medium bypass flow, and ensure that the medium enters the heat exchange channel uniformly.

3. End reinforcing rib structure: Reinforcing ribs are embedded in the corner hole area to enhance the tear resistance of the corner hole position, while blocking the medium bypass channel and strengthening the sealing effect.

4. Side positioning buckle: The gasket edge is evenly distributed with positioning teeth, which are inserted into the plate slot to fix the position of the rubber pad and prevent it from shifting or curling during equipment operation, making it easy to disassemble and maintain on site.

Product Features
1. Original factory dimensional accuracy: Produced according to the original standards of Fengkai, the shape, cross-section, corner holes, and buckle dimensions match the corresponding plates, with high assembly fit and reliable sealing.

2. Multiple rubber materials to choose from, suitable for different working conditions:
NBR nitrile rubber: resistant to mineral oil and lubricating oil, suitable for oil cooling systems;
EPDM (Ethylene Propylene Diene Monomer) rubber: resistant to hot water, cooling water, and weakly corrosive media, commonly used in HVAC heat exchange stations;

FKM fluororubber: resistant to high temperatures, organic solvents, and chemical corrosion, used in harsh chemical high-temperature conditions.

3. Excellent compression springback performance: the rubber raw material has stable performance, is not easy to appear permanent compression deformation under long-term compression, is anti-aging, and reduces the probability of leakage failure of the heat exchanger.

4. Reliable structural strength: The corner hole reinforcement design enhances the gasket's tear resistance and can adapt to certain pressure fluctuation conditions.

5. Easy installation and maintenance: The positioning buckle design makes gasket disassembly and positioning simple, reducing equipment maintenance downtime.

Technical Parameters

FAQ:
Q1.What about the lead time?
A: 5-7 days for Sample preparing ,15-20 working days for mass production.

Q2. Is it OK to print my logo on led light product?
A: Yes. Please inform us formally before our production.

Q3: Do you offer guarantee for the products?
A: Yes, we offer 1 years warranty to our products.

Q4: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.

Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.

Company Profile

DINKONDA GLOBAL has been developing and supplying equipment and components for specialized thermal power plants and related industries for 20 years and is one of the a market-leading global manufacturers and providers in the industry. We have a professional technical research and development team, professional management talents and dozens of quality inspection personnel. The company has more than 50 CNC machining centers, CNC lathes, various inspection equipment and other professional equipments.
Our comprehensive product portfolio and over 20 years of industry knowledge mean customers can rely on us to deliver innovative, reliable and economic products. Chenglei products are designed and manufactured with quality components and clear user interfaces for quick and safe operation in the field. Our strict product development and testing ensures long-lasting performance and continued reliability. Our independently developed and produced CL series valve electric actuators are widely used in various industries such as Oil & Gas, Water & Power, and Chemical, Process & Industrial .
Customers rely on us for innovative, high quality and dependable products for managing the flow of liquids, gases and powders. We help customers around the world to reduce emissions, improve efficiency, minimize their environmental impact and assure safety.