DINKONDA GLOBAL Power Plants Special BR0.6 Series 0.6 ㎡ Plate Heat Exchanger, Large Flow, High Heat Transfer Medium To Large Detachable Heat Exchange Equipment

DINKONDA GLOBAL Power Plants Special BR0.6 Series 0.6 ㎡ Plate Heat Exchanger, Large Flow, High Heat Transfer Medium To Large Detachable Heat Exchange Equipment

Product Overview
The BR0.6 series plate heat exchanger is a medium to large detachable heat exchange equipment with a single heat exchange area of 0.6 square meters, developed for industrial and municipal conditions with high flow rates and high heat transfer capacity. The whole machine relies on molded corrugated plates to form staggered medium flow channels, achieving efficient wall to wall heat transfer between cold and hot media. The equipment balances heat transfer performance, system resistance, and operational reliability. It can be used independently as a single unit, or can be arranged in parallel or series to meet the flexible configuration requirements of process systems. It is widely used in large-scale heat exchange stations, factory process heat exchange, and auxiliary cooling of generator sets.

Structural Composition
1. Pressure bearing frame components: The fixed pressure plate and movable pressure plate are welded with thick steel plates, and the overall structure is coated with anti-corrosion blue paint; The flange position is thickened and reinforced to resist the alternating thrust caused by high flow media. The flange size is matched with large-diameter industrial pipelines to reduce pipeline throttling losses.

2. Heat exchange plate: The effective heat exchange area of a single plate is 0.6 square meters. The plate is formed by high-precision hydraulic compression molding, and the ripple angle is optimized through flow field simulation; We can provide two types of patterns: herringbone and diagonal ripple; The material options include 304, 316L, 2205 duplex steel, and titanium plate, with selection based on different corrosion levels of the medium. The design of enlarged guide holes at the four corners of the plate reduces local eddy currents at the inlet of the medium and minimizes plate erosion and wear.

3. Sealing gasket system: using positioning snap on gaskets, with precise limit of gasket slots to prevent gasket displacement and movement during operation; The gasket can be made of EPDM, NBR, FKM fluororubber, suitable for high-temperature hot water, thermal oil, seawater, and weakly corrosive chemical media; No need for on-site bonding, shortening the maintenance and replacement cycle.

4. Guiding compression mechanism: thickened and tempered guide rod, surface rust proof treatment to ensure smooth sliding of the plate group; High strength compression pull rod, uniformly apply force at multiple points, maintain sealing pre tightening force under pressure fluctuations and temperature fluctuations, and reduce leakage risk.

5. Ground support: widened and reinforced support, with foot installation holes to enhance equipment vibration resistance, suitable for 24-hour continuous operation environment in pump rooms.

Product Core Highlights
1. Flow field optimization to reduce erosion damage: The four corner guide holes of the plate are enlarged to optimize the flow field of the medium in and out, weaken local eddies, reduce the erosion of the edges and corners of the plate by high-speed media, extend the service life of the plate, and are suitable for working conditions with high medium flow rates.

2. Support flexible configuration in series and parallel: a single frame can adjust the heat exchange area by adding or removing plates; Multiple devices can be connected in series to increase heat exchange temperature difference and connected in parallel to increase processing flow, suitable for phased project construction and load expansion, without the need to reselect the entire machine.

3. Balancing heat transfer efficiency and pressure drop: The ripple parameters have been simulated and verified to avoid excessive system resistance caused by simply pursuing high heat transfer coefficients, avoiding unnecessary increase in power consumption of the circulating pump and achieving a balance between heat transfer performance and energy consumption.

4. Outstanding resistance to temperature fluctuations: The frame pressure plate has sufficient rigidity and is equipped with positioning buckle gaskets. Under frequent start stop and cold shock conditions of the system, the sealing system has good stability and reduces leakage faults, making it suitable for intermittent operation process systems.

5. Friendly operation and maintenance, suitable for on-site maintenance conditions: snap on gaskets do not require adhesive bonding, and can be directly disassembled and replaced during maintenance; The frame has sufficient travel allowance and ample space for plate pulling, making on-site cleaning and replacement of plates easy to operate and reducing downtime for maintenance.

6. The material scheme covers a wide range: from ordinary circulating water to seawater and weakly corrosive chemical materials, corresponding plates and gaskets can be matched to complete various process tasks such as heating, cooling, condensation, and waste heat recovery.

Technical Specifications
Model: BR0.6
Single piece heat exchange area: 0.6 ㎡
Nominal pressure: 1.0MPa, 1.6MPa
Working temperature: -20~180 ℃ (determined by the material of the sealing gasket)
Plate material: 304, 316L, 2205 duplex steel, TA1 titanium material
Sealing gasket: EPDM, NBR, FKM fluororubber, butyl rubber
Applicable media: circulating hot water, cooling water, thermal oil, lubricating oil, seawater, weakly corrosive process fluid
Execution standard: GB plate heat exchanger manufacturing related standards

FAQ:
Q1.What about the lead time?
A: 5-7 days for Sample preparing ,15-20 working days for mass production.

Q2. Is it OK to print my logo on led light product?
A: Yes. Please inform us formally before our production.

Q3: Do you offer guarantee for the products?
A: Yes, we offer 1 years warranty to our products.

Q4: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.

Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.

Company Profile

DINKONDA GLOBAL has been developing and supplying equipment and components for specialized thermal power plants and related industries for 20 years and is one of the a market-leading global manufacturers and providers in the industry. We have a professional technical research and development team, professional management talents and dozens of quality inspection personnel. The company has more than 50 CNC machining centers, CNC lathes, various inspection equipment and other professional equipments.
Our comprehensive product portfolio and over 20 years of industry knowledge mean customers can rely on us to deliver innovative, reliable and economic products. Chenglei products are designed and manufactured with quality components and clear user interfaces for quick and safe operation in the field. Our strict product development and testing ensures long-lasting performance and continued reliability. Our independently developed and produced CL series valve electric actuators are widely used in various industries such as Oil & Gas, Water & Power, and Chemical, Process & Industrial .
Customers rely on us for innovative, high quality and dependable products for managing the flow of liquids, gases and powders. We help customers around the world to reduce emissions, improve efficiency, minimize their environmental impact and assure safety.